About cold rooms and industrial refrigeration
In cold rooms and display cabinets, a small fault can turn into a large product loss. An iced-up evaporator, a dirty condenser or a drifted controller causes the temperature to rise slowly and is often noticed only when an alarm goes off.
What we do
- Cold room panel, door and condensing unit installation
- Condenser and evaporator cleaning
- Defrost heater and timer service
- Compressor, valve and refrigerant circuit repair
- Supermarket refrigerated cabinet and display case service
- Process chillers and glycol systems
- Temperature logging and alarm systems
- Blast freezer services
Common problems
| Symptom / alarm | Possible cause | What we do on site |
|---|---|---|
| Room does not reach set temperature | Dirty condenser, low refrigerant, door gasket | Cleaning, leak test, gasket replacement |
| Evaporator is icing up | Defrost fault, fan, humidity | Heater and timer test |
| The compressor cycles on and off frequently | Pressure switch, refrigerant, control settings | Pressure and setting check |
| Cabinet is sweating | Door heater, humidity, air curtain | Heater and fan check |
Buildings we serve
Our base is in Ankara Etimesgut. We provide cold room and industrial refrigeration services daily in Ankara, and on a project and contract basis in all 81 provinces of Türkiye, including İstanbul, İzmir, Bursa, Antalya, Konya, Kayseri, Eskişehir, Kocaeli, Adana, Gaziantep, Samsun and Trabzon. See our service areas.
Frequently asked questions
How quickly do you respond to a cold room breakdown?
For contract customers we commit to a written response time; our emergency line is open 24/7.
What is determined when installing a cold room?
Panel thickness and condensing unit capacity are calculated based on product type, entry temperature, daily product intake and room size.
Do you also service supermarket refrigerated cabinets?
Yes, we service supermarket refrigeration equipment, including display counters and upright and chest cabinets.